Manual Operation
MTD200 MPEG Test Decoder User Manual
4–15
MONITORING/PARAMETER GROUP Menu.
For monitoring the transport stream, the
measurement parameters (see Table 2–1 on page 2–3) can be activated individu-
ally in an M-out-of-N selection. Only error seconds for active parameters are
signaled to LEDs, indicated in the MONITORING/STATISTICS Menu and
entered in the report (refer to MONITORING/REPORT Menu on page 4–13).
Parameter
Activated for
monitoring
Figure 4–18: MONITORING/PARAMETER GROUP menu
y
b
a
'
Set cursor to desired parameter (for example, FIRST PRIORITY
ERROR: TS SYNC)
ENTER
Switches monitoring for the selected parameter on ‘[X]’ or off ‘[ ]’
ESC
Returns to the MONITORING menu
The structure of this menu is identical to that of the MONITORING/STA-
TISTICS Menu. Instead of the error counter, the marker for parameter moni-
toring on ‘[X]’ or off ‘[ ]’ is displayed in front of each parameter.
MONITORING/LIMITS Menu.
In addition to active state of individual parameters,
the limits for the distances of PCR values and PSI and SI tables can be indicated
(see Table 4–1). When a limit is exceeded, the error condition is considered
fulfilled and an error is entered in the report and error seconds in the statistics for
active parameters.
Summary of Contents for MTD200
