Remote Control
MTD200 MPEG Test Decoder User Manual
5–35
With the ‘Trigger on Error’ mode the faulty part of the transport stream can be
read from the internal memory via the remote-control interface if one or several
of the settable trigger conditions occur (refer to Measurement Parameters on
page 5–42).
This mode is switched on using the command SENSe:FUNCtion:TRERror.
Command
Parameter
Unit
Notes
CONFigure
:TRERror
:STATe[?]
ON | OFF
Starts a ‘Trigger on Error’
:TRIGger[?]
<parameter name>, ON | OFF
Enters or clears individual parameters of the trigger condition.
:ALL
ON | OFF
Enters or clears all trigger condition parameters.
READ
[:SCALar]
:TRERor?
–400 to +400
Reads a packet, 0 = packet in which the error occurred
CONFigure :TRERor :STATe[?] ON | OFF
The command activates and deactivates the trigger for the conditions set with
CONFigure:TRERror:TRIGer. When the trigger condition occurs, bit 5 is set in
the OPERation:STATus register and, if desired, a service request is initiated. In
addition, the setting for CONFigure:TRERror:STATe is reset to OFF. If the
Trigger on Error mode is not set, an error message will be generated.
Example: CONF:TRER:STAT
ON
CONFigure :TRERor :TRIGger[?] <parameter name>, ON | OFF
This command includes the parameter in the trigger condition or clears it.
Example: CONF:TRER:TRIG
CCNT,
ON
CONFigure :TRERor :TRIGger[?] :ALL ON | OFF
This command includes all parameters in the trigger condition or clears them.
Example: CONF:TRER:TRIG:ALL
ON
Commands for the
‘Trigger on Error’ Function
Summary of Contents for MTD200
