Tektronix MTD200, User Manual

Page: 163 / 211

Remote Control
5–66
MTD200 MPEG Test Decoder User Manual
Table 5–16: Execution error (cont.)
Error
number Error text returned upon queue query
Explanations
–223 Too much data
The command contains more data than the device can handle.
Example: insufficient memory.
–224 Illegal parameter value
The parameter value is illegal.
Example: The parameter value does not correspond to the list is possible values.
–230 Data corrupt or stale
Data incomplete or invalid.
Example: a measurement was aborted by the device.
–240 Hardware error
A legal program command could not be executed because of hardware problems in
the device.
–241 Hardware missing
A legal program command could not be executed because of missing device
hardware.
Example: an option is not fitted.
Device-Specific Error (causes bit 3 in the ESR register to be set).
Table 5–17: Device-Specific error
Error
number Error text returned upon queue query
Explanations
–300 Device-specific error
Device-specific error that cannot be defined more precisely.
–310 System error
Indicates that some error termed system error has occurred. Please contact the
R&S service center.
–311 Memory error
An error was detected in the device’s memory.
–313 Calibration memory lost
–314 Save/recall memory lost
–315 Configuration memory lost
–330 Self test failed
–350 Queue overflow
Error code entered in the queue in lieu of the code that caused the error. This code
indicates that there is no room in the queue and that the error occurred but was not
recorded. Five of these codes are accepted in the queue.