Remote Control
5–12
MTD200 MPEG Test Decoder User Manual
‘ ” ’
Quotation marks denote the beginning of a character string and terminate
it.
‘ # ’
The double cross (pound symbol) denotes the beginning of block data.
‘ ’
A white space (ASCII code 0 to 9 and 11 to 32 decimal), such as a space,
separates header and parameters.
Description of Commands
In the following sections, all commands implemented in the MPEG 200 test
decoder are tabulated according to the operating mode and the command system,
and are described in detail. The notation is largely in line with the SCPI
standard. The SCPI conformity information is given in Table 5–13 on page 5–60.
In Table 5–13 on page 5–60, all commands implemented in the device are
tabulated.
Command table.
Command:
In the command column the table shows an overview of the commands and
their hierarchical relationships (refer to Indentations on page 5–12).
Parameter:
In the parameter column the required parameters and their range of values
are stated.
Unit:
The unit column shows the basic unit of the physical parameters.
Notes:
In the notes column it is stated,
- whether the command has a query form,
- whether the command is only in the form of a query,
- whether the command is implemented in a certain instrument option only.
Indentations.
The various levels of the SCPI command hierarchy are shown in
the table by indentations to the right. The lower the level, the greater the
indentation to the right. It should be noted that the complete notation of the
command always includes the higher levels too.
In the command description the hierarchy of the commands is shown. This
means that for each command all keywords listed above the command through to
the left-hand margin have to be considered too.
Notation
Summary of Contents for MTD200
