Tektronix MTD200, User Manual

Page: 137 / 211

Remote Control
5–40
MTD200 MPEG Test Decoder User Manual
Example: STAT:OPER:PTR 32
STATus :OPERation :NTRansition 0 to 32767
Sets the negative transition filters of the CONDition bits of the STATus:OPERa-
tion register. If an NTRansition bit is 1, the associated bit in the EVENt register
is set upon transition of the CONDition bit from 1 to 0.
The numeric response after loading the initial state (PRESET) is 0.
Example: STAT:OPER:NTR 0
STATus :QUEStionable
This note provides the commands for controlling the SCPI-STATus:QUEStion-
able register.
STATus :QUEStionable [:EVENt]?
This query returns the contents of the EVENt register of the STATus:QUEStion-
able register. Reading the EVENt register clears it.
Example: STAT:QUES?
STATus :QUEStionable :CONDition?
Returns the contents of the CONDition register of the STATus:QUEStionable
register. Reading the CONDition register is nondestructive.
Example: STAT:QUES:COND?
STATus :QUEStionable :ENABle 0 to 32767
This command sets the bits of the ENABle registers of the STATus:QUEStion-
able register. This register selects and enables the individual bits of the EVENt
register for the summary bit of the status byte. The numeric response after
loading the initial state (PRESET) is 32767.
Example: STAT:QUES:ENAB 128
STATus :QUEStionable :PTRansition 0 to 32767
Sets the positive transition filters of the CONDition bits of the STATus:QUES-
tionable register. If a PTRansition bit is 1, the associated bit in the EVENt
register is set upon transition of the CONDition bit from 0 to 1.