Tektronix MTD200, User Manual

Page: 122 / 211

Remote Control
MTD200 MPEG Test Decoder User Manual
5–25
SENSe :PROGram :AUDio 32 to 8191
Sets the PID for the audio stream to be decoded. This is only required if the
program contains more than one audio stream or if the PMT is faulty.
Example: SENS:PROG:AUD 101
READ [:SCALar] :TS :BITRate?
Queries the bit rate of the transport stream in the MONitoring mode. In the
TRERror and DUMP modes, NAN is returned.
Example: READ:TS:BITR?
Response: 38.014e6
The response is 38.014 Mbit/s
READ [:SCALar] :PROGram :NAMe? 1 to 65535
Queries the program name.
Example: READ:PROG:NAM? 1
Response: ARD
READ [:SCALar] :PROGram :BITRate? 1 to 65535
Queries the bit rate of a program in the MONitoring mode. In the TRERror and
DUMP modes, NAN is returned.
Example: READ:PROG:BITR? 1
Response: 5.3e6
The response is 5.3 Mbit/s
READ [:SCALar] :PROGram :CONDaccess? 1 to 65535
Queries whether the program is encrypted.
Example: READ:PROG:COND? 1
Response: 0
READ :ARRay :PROGram?
Queries the program numbers in the transport stream.
Example: READ:ARR:PROG?