Tektronix MTD200, User Manual

Page: 131 / 211

Remote Control
5–34
MTD200 MPEG Test Decoder User Manual
Example: SYST:ERRor? =
Response: –221, “Settings conflict”
SYSTem :VERSion?
Queries the number of the SCPI version supported by the device.
Example: SYST:VERS?
Response: 1995.0
SYSTem :DISPlay :CONTents STATistic | REPort | PROGram | INFO
*RST value: INFO
This command selects the display on the OSD in the remote-control mode:
STATistic selects the MONITORING\STATISTICS menu
REPort selects the MONITORING\REPORT menu
PROGram selects the DECODER\PROGRAM menu
INFO selects the STATUS menu
Example: SYST:DISP:CONT REP
SYSTem :KLOCk[?] ON | OFF
This command locks the front panel keyboard or enables the switchover to
LOCAL mode.
Example: SYST:KLOCk ON
DISPlay :OSD
This node provides the commands for setting the OSD.
DISPlay :OSD :MODE ON | OFF
*RST value: ON
This command selects the operating mode for the OSD:
OFF The menus are only displayed on the LCD.
ON The menus are displayed simultaneously on the LCD and
OSD.
Example: DISP:OSD:MODE ON