Remote Control
MTD200 MPEG Test Decoder User Manual
5–37
AFPID
Only transport packets with an adaptation field and a PID
set with CONFigure:TRIGger:PID are read.
AF
All transport packets with an adaptation field are read.
PUSPID
Transport packets with payload unit start indicator and PID
set with CONFigure:TRIGger:PID are read.
PUS
All transport packets with with payload unit start indicator
are read.
HEADer
The header (4 bytes) of each transport packet is read.
ALL
All transport packets are read.
OFF
The trigger is disabled.
After the number of transport packets set with CONFigure:DUMP:COUNt has
been read into the dump memory, bit 5 is set in the OPERation:STATus register
and, if desired, a service request is activated. In addition, the setting for
CONFigure:DUMP:STATe is reset to OFF. If function DUMP is not set, an error
message is generated.
Example: CONF:TRER:STAT
PID
CONFigure :DUMP :TRIGger :PID[?] 0 to 8191
*RST value:
0
The commands determines the PID for the filter conditions PID and AF.
Example: CONF:DUMP:TRIG:PID
100
CONFigure :DUMP :COUNt[?] 1 to 1394
*RST value:
1394
This command determines the number of transport packets to be read, which
correspond to the filter condition set with CONFigure:DUMP:STATe. With
CONFigure:DUMP:STATe HEADer, 47 packet headers of 4 bytes each are read
for each unit of :COUNt. The query reads the number of transport packets
currently read in. With mode MONitoring and TRERror set, NAN is returned.
Example: CONF:DUMP:COUN
250
READ [:SCALar] :DUMP? 1 to 1394
This commands reads the data of a transport stream packet once the number of
the transport packets set with CONFigure:DUMP:COUNt is available in the
dump memory. The data are output in the form of block data with a constant
Summary of Contents for MTD200
