manualshive.com logo in svg

Tektronix DPO2304SX, Printable Help

The Tektronix DPO2304SX oscilloscope user manual is available for free download on manualshive.com. This printable help resource offers detailed instructions on how to use and optimize this powerful instrument. Get your manual now to unlock the full potential of your DPO2304SX!

Share
Download
background image

I2C addressing mode

In the Addressing Mode drop-down list, select the bit addressing mode.

Installing software

The instrument system and application software is pre-installed at the factory. If you have to reinstall the software for any reason,
refer to the instruction manuals that accompanied the product.

Software release notes. Read the software release notes (README.TXT) on the product software DVD before performing
installation procedures. This file contains additional information that supersedes other product documentation.

To view the README.TXT file, start the Windows Notepad accessory and open the file from the product software DVD that came
with your instrument.

Accessory software. The product software DVD contains accessory software and files that you can install on the instrument or
on another PC. Refer to the instructions that accompany the DVD for installation information.

Desktop applications. You can install desktop application software on the instrument. The instrument has been tested with the
following software products installed:

■

Microsoft Office (Word, Excel, PowerPoint, etc.)

■

MathCad

■

MATLAB

Other software products may be compatible but have not been tested by Tektronix. If the instrument malfunctions after you install
software, uninstall the software and then reinstall the instrument application to restore proper operation.

Before installing other desktop applications, exit the instrument application. To do this, click Exit on the File menu.

Interactions of roll mode and other instrument settings

Roll mode can interact with other instrument settings:

■

If Roll mode is on and you turn on Fast Acquisitions, Roll mode will be suppressed until you turn Fast Acquisitions off.

■

If Roll mode is on, math waveforms and measurements are updated only after acquisition is stopped (when you manually
stop an acquisition). If you stop an acquisition before a record is filled, the math waveform or measurements will be
calculated on the partial data.

■

Roll mode is only valid for real-time acquisition modes such as Sample, Peak Detect, and Hi Res. Roll mode is ignored in
Average or Envelope acquisition modes.

■

Deskew values are ignored when Roll mode is on.

■

If you attempt to save a waveform when Roll mode is on, only the waveform points in the acquisition memory are saved.

■

The maximum record length where Roll mode is allowed is 10 M.

IVI drivers

IVI drivers conform to specifications produced by the IVI Foundation.

Unlike VXI-plug&play drivers, IVI drivers provide a standard interface to different classes of instruments, including oscilloscopes
and spectrum analyzers.

IVI drivers have the ability to simulate instruments, automatically check ranges, and multithread safety features.

 

Oscilloscope reference

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 

777

Summary of Contents for DPO2304SX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DPO2304SX

ZOLL 330 Operator'S Manual preview
330
Brand: ZOLL Pages: 84
Kaivac 2100 Series Operator'S & Parts Manual preview
2100 Series
Brand: Kaivac Pages: 29
MacDon 1000 Operator'S & Parts Manual preview
1000
Brand: MacDon Pages: 65
Laica SB2200 Instructions And Guarantee preview
SB2200
Brand: Laica Pages: 4
GE TruSat User Manual preview
TruSat
Brand: GE Pages: 43
GE Responder AED Service Manual preview
Responder AED
Brand: GE Pages: 37
GE Senographe DS Operator'S Manual preview
Senographe DS
Brand: GE Pages: 210
GE MAC 5000 Field Service Manual preview
MAC 5000
Brand: GE Pages: 160
GE MAC 1600 Service Manual preview
MAC 1600
Brand: GE Pages: 146
GE Dash 2500 Quick Manual preview
Dash 2500
Brand: GE Pages: 6
GE ApexPro Manual preview
ApexPro
Brand: GE Pages: 27
GE Voluson 730 Manual preview
Voluson 730
Brand: GE Pages: 4
Gardena T 1030 Opearting Instructions preview
T 1030
Brand: Gardena Pages: 19
Jackco 858 User Manual preview
858
Brand: Jackco Pages: 6
Yamaha CBX-D3 Owner'S Manual preview
CBX-D3
Brand: Yamaha Pages: 29
MAGSTIM NEUROSIGN V4 User Manual preview
NEUROSIGN V4
Brand: MAGSTIM Pages: 86
Orliman 94231 Use And Maintenance Instructions preview
94231
Brand: Orliman Pages: 11
Swing-N-Slide Side Winder Slide Installation Instructions preview
Side Winder Slide
Brand: Swing-N-Slide Pages: 2

Brands by name

Popular brands

Load more brands