Tektronix DPO2304SX, Printable Help

Page: 449 / 920

Behavior. Use the Freq/Per trigger to trigger the instrument on a frequency or period that is either within or outside the specified
range. The range is defined by the Upper Limit and Lower Limit controls. You can specify frequencies or periods for either
positive or negative pulses. The frequency and period are measured at the voltage level specified by the Level control. The
trigger can also be qualified by the logical state of other channels. When you click on the trigger window controls, the trigger
graphic shows the trigger sequence.
NOTE. You have the option to add user-defined labels for analog, reference, bus, and digital sources.
What do you want to do next?
Learn more about other trigger types.
Return to the Trigger Setup control window.
Trigger graphic
The trigger graphic displays a visual indicator of the trigger criteria. Depending on the trigger type, the instrument will update the
graphic as you define the trigger parameters.
Set up a glitch trigger
From the Trig menu, select Glitch Setup.
Overview. Use the controls in this window to set up the Glitch trigger parameters.
Trigger setups
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 417