Tektronix DPO2304SX, Printable Help

Page: 111 / 920

Controls Description
The Acquisition Status readouts, and lights on some instruments, indicate the state of the acquisition.
Arm indicates the instrument is filling the pretrigger portion of
the waveform record.
Ready indicates the instrument can accept a valid trigger event
and is waiting for the trigger event to occur.
Trig’d or Triggered indicate that instrument has recognized a
valid trigger and is filling the posttrigger portion of the
waveform.
When Arm, Ready, and Trig’d are not on, the acquisitions have
stopped.
When Ready and Trig’d are both on, the instrument has
recognized a valid trigger and is waiting for a delayed trigger.
When the instrument recognizes a delayed trigger, it will fill in
the posttrigger portion of the waveform.
General purpose controls
Use the following front-panel controls to perform general-purpose tasks such as to Autoset the instrument, to send items to the
printer, or to enable cursors.
Controls Description
Push the Autoset button to automatically set up the instrument
to obtain and display a stable waveform of usable size. For
information on the Autoset default settings click
Autoset .
Push the Default Setup button to reset the instrument to the
factory default settings.
Push the Menu Off button to turn off a displayed menu.
NOTE. Menu Off is available only on MSO/DPO5000B Series
instruments.
Push the Print button to make a hard copy of the screen. The
printed image is sent directly to the selected (internal or
attached) printer. To change the print settings, click the File
menu Print command, and change the settings in the Print
dialog box.
Controls and connectors
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 79