Tektronix DPO2304SX, Printable Help

Page: 650 / 920

a. Select a color Palette for your copied images.
b. Select the image View: to copy an image of the entire screen, select Full-screen; to copy an image of the selected graticule,
select Graticule(s) only.
c. The Screen Capture Format is BMP only.
7. Set the Waveform Options:
a. Open the Waveforms tab.
b. Select the data format (Data Destination) for the waveform you want to copy.
c. Select a valid waveform from the Source list.
d. Select the Include waveform scale factors check box if you want to include waveform details like header information (record
length, sample interval, trigger point information, and so on). If you only want to include the waveform voltage values, clear
the selection.
e. Select the number of samples that you want to copy from the Waveform curve data range. Select all samples, a range of
samples, or only the samples between the cursors. If you select Save Samples between Cursors, you can use the
multipurpose knobs to adjust the positions if the cursors are already active. If they are not, the cursors are activated in their
most recent positions.
f. If you are copying Fast Acquisitions data, select the data ordering from the list.
8. Set the Measurement Options:
a. Open the Measurements tab.
b. Select either Displayed Measurements (make sure that measurements are displayed in the graticule via the Measurement
Control window) or Histogram Data.
c. If you clicked the Displayed Measurements option, select the Data Format, either Numeric or Text.
9. Click Copy to save your setup information to the Windows clipboard.
Save a screen capture
Use this procedure to save screen captures to the instrument memory, a CD, or third-party storage device. The images you want
to save must be displayed within the graticule.
1. From the File menu, select Save As; then select Screen Capture.
2. Click the Options button to open the Screen Capture Save Options dialog box.
3. Select a color Palette for your screen capture.
4. Under View, select from the following:
■ Full Screen. Saves an image of the entire screen.
■ Hide Menu/Toolbar. Click this check box if you do not want the menu and toolbar included.
■ Graticule(s) Only. Selects an image of the selected graticule.
5. Select a data format from the Screen Capture Format list.
6. Click OK to save the screen capture options, or click Cancel to close the dialog box without saving the changes.
7. In the Save As dialog box, select the location to save from the Save in drop-down list. The default location is
C:\Users\
[Username]\Tektronix\TekScope\Screen Captures
.
How to ?
618 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series