Tektronix CMD 80, User Manual

Page: 651 / 672

Appendix I: Autorun
CMD 80 Digital Radiocommunication Tester User Manual
I–11
To start the transmitter test, press the START softkey. During the test, the current
state of the test is displayed on the screen of the tester.
After the transmitter test is finished, the test results are displayed on-screen.
Press the MENU UP key to leave the test results menu. The printer menu is then
displayed automatically.
Use this test to obtain the mobile station Receiver Quality. The RXD Test
performs the following Receiver Quality Tests:
H
Sensitivity
H
Dynamic Range
H
Traffic Channel Demodulation
Table I–1: Traffic channel demodulation tests
Test 1 Test 2 Test 3 Test 4 Test 5 Test 6 Test 7 Test 8 Test 9 Test 10 Test 11 Test 12
Max.
FER
3.0% 1.0% 0.5% 1.0% 1.0% 1.0% 3.0% 1.0% 0.5% 1.0% 1.0% 1.0%
Total
Power
–55
dBm
–55
dBm
–55
dBm
–55
dBm
–55
dBm
–55
dBm
–55
dBm
–55
dBm
–55
dBm
–55
dBm
–55
dBm
–55
dBm
Traffic
Level
–16.3
dB
–15.8
dB
–15.6
dB
–16.1
dB
–15.6
dB
–15.5
dB
–13.0
dB
–12.7
dB
–12.4
dB
–14.3
dB
–14.8
dB
–15.4
dB
Pilot
Level
–7.0 dB –7.0 dB –7.0 dB –7.0 dB –7.0 dB –7.0 dB –7.0 dB –7.0 dB –7.0 dB –7.0 dB –7.0 dB –7.0 dB
AWGN
Level
1.0 dB 1.0 dB 1.0 dB 1.0 dB 1.0 dB 1.0 dB 1.0 dB 1.0 dB 1.0 dB 1.0 dB 1.0 dB 1.0 dB
Data
Rate Full Full Full Half Quarter Eight Full Full Full Half Quarter Eight
Rate
Set
1 1 1 1 1 1 2 2 2 2 2 2
The configuration submenu of the RXD test allows the setting of different test
parameters. The configuration menu for the receiver test is shown in Figure I–14.
Autorun RXD test (CDMA)