Tektronix CMD 80, User Manual

Page: 644 / 672

Appendix I: Autorun
I–4
CMD 80 Digital Radiocommunication Tester User Manual
H
NET TYPE: Set the Net Type by toggling the NET TYPE softkey
H
NID: Network identifier ranges from 0 to 65534
H
SID: System identifier ranges from 1 to 32767
H
TIMEOUT: Timeout for Mobile Registration
Figure I–5: Autorun Config menu
The Save/Recall Menu (see Figure I–6) is used to save all Parameters used in
Autorun. Once all the parameters have been established, this menu allows you to
save and recall up to 50 different user settings.
H
SELECT CONFIG: Select the user file <userx.cnf> by toggling the
softkey.
H
>>: The number of the user is incremented by 10.
H
<<: The number of the user is decremented by 10.
H
SAVE CONFIG: The current parameter settings are saved into the selected
user file.
H
LOAD CONFIG: The parameters of the selected user file are loaded into
the CMD80.
H
FACTORY SETTINGS: All the parameters which can be set in Autorun
are reset to the factory default values.
Autorun save/recall menu