Tektronix CMD 80, User Manual

Page: 191 / 672

Analog: Configuration
3–124
CMD 80 Digital Radiocommunication Tester User Manual
Figure 3–96: Analog receiver quality configuration — sensitivity menu
Press the DEFAULTS softkey to set the parameters to their preset conditions.
(Typically, the default values are based on IS-98 specifications.)
H
HUM/NOISE.
Press the HUM/NOISE softkey to display the HUM/NOISE
menu. See Figure 3–97. Use this menu to set the parameters for the
RECEIVER QUALITY HUM/NOISE test.
Figure 3–97: Analog receiver quality configuration — hum/noise menu
You can set the following test parameters:
H
Hum/Noise. Press the HUM/NOISE softkey to set the maximum test
limit for the hum/noise level.