Tektronix CMD 80, User Manual, Page: 437 / 672

CMD 80 Digital Radiocommunication Tester User Manual
F–1
Appendix F: Remote Control Command Tables
This appendix contains a listing of the remote command categories and a brief
explanation about reading the data in the command tables. An alphabetical
listing of the commands (index) begins on page F–168.
Remote Command Groups
The remote commands are organized into the following groups and subgroups:
Use the common commands to set and query registers and machine information.
Use the instrument state commands to set and query the tester setup.
H
Configuration and results
H
Queries
H
External attenuation and gain
H
Reference and timing
H
String data base
H
Save and recall
Use the additional measurement commands to take current, voltage, and
broadband power measurements.
Use the network and test selection commands to select the network system and
standard used in the testing and to invoke the desired tests.
Use the handoff commands to configure the handoff of an established call to
another network, system or standard for both local transitions and interstandard
handoffs.
H
Handoffs from CDMA
H
Handoffs to/from Analog
H
Handoffs to/from TDMA
Common (*) Commands
Instrument State
Additional Measurements
Network and Test
Selection
Handoffs