Tektronix CMD 80, User Manual

Page: 106 / 672

CDMA: Manual Test (Signaling)
CMD 80 Digital Radiocommunication Tester User Manual
3–41
The secondary sector PN offset and traffic channel may only be edited when the
secondary sector is completely off. If the secondary sector is emitting any energy,
the softkeys will be removed and the secondary sector parameters will be fixed.
The secondary sector portion of the display will change to show this:
NOTE
. This form of the menu will only be seen when entering the softer handoff
configuration menu from the softer handoff measurement menu, not from the call
established configuration menu.
H
FER INTERVAL. Press this softkey to use the front-panel VAR control to set
the FER interval that you want the tester to use to compute the frame error
rate.
H
MAXIMUM FER. Press this softkey to use the front-panel VAR control to
set the maximum FER allowed. FER values in excess of this limit will be
shown in reverse video.
H
T_ADD. Press this softkey to use the front-panel VAR control to set the pilot
detection threshold.
H
T_DROP. Press this softkey to use the front-panel VAR control to set the
pilot drop threshold.
H
TOTAL POWER. This softkey enables the VAR control to set the tester total
power output level.
H
PN OFFSET. Press this softkey to use the VAR control to set the secondary
sector PN offset.
H
TRAFFIC CHANNEL. This softkey enables the VAR control to set the
secondary sector traffic channel.