TDMA: Manual Test
CMD 80 Digital Radiocommunication Tester User Manual
3–213
Press the BS SIGNAL CNFG softkey to display the base station configuration
menu associated with the CALL ESTABLISHED state for the selected network.
This section describes the menus when TDMA is the selected system. See
Figure 3–164. Use this menu to set the operating parameters of the base station
signal.
Figure 3–164: TDMA BS signal configuration (call established) menu
While in this menu, you can vary the following parameters of the base station:
H
POWER. Press this softkey to set the level of the base station transmitter
power (–131 dBm to –17 dBm).
H
DCCH MAC. Press this softkey to set the Digital Control Channel Mobile
Attenuation Code (0 to 10).
H
DTC MAC. Press this softkey to set the Digital Traffic Channel Mobile
Attenuation Code (0 to 10). This sets the expected power level and attenua-
tion/gain through the receive path.
H
DEFAULTS. Press this softkey to set all the parameters to their preset
conditions. Typically, the default values are based on the TDMA IS-136-A
specifications.
NOTE
. The parameters in the rounded boxes cannot be changed while a call is
established. To change these parameters, press the MENU HOME front-panel
key (dropping the call). Select the CONFIG MENU softkey, then select the
TDMA BS SIGNAL CNFG softkey.
BS Signal Configuration
(Call Established)
Summary of Contents for CMD 80
