TDMA: Configuration
CMD 80 Digital Radiocommunication Tester User Manual
3–253
TDMA BS PARAMETERS.
This softkey displays a menu to specify parameters for
the simulated base station (see Figure 3–206).
Figure 3–206: TDMA BS parameters configuration menu
You can set the following parameters for the base station:
H
SOC. Press this softkey to set the System Operator Code number (0 to
4095). This is a number that uniquely identifies a cellular service provider.
H
SID. Press this softkey to set a system identification number (1 to 32767).
This is a number that uniquely identifies a cellular system.
H
MOBILE ID TYPE. Press this softkey to toggle the mobile ID type between
MIN (Mobile ID Number) and IMSI (International Mobile Station Identity)
as defined in IS-136 section 8.1.3 and 8.1.1 respectively.
H
PAGING DURATION. Press this softkey to set the paging duration. The
paging duration is how long the base station sends a paging message over the
control channel to the mobile station when a call is being established. If you
set this time too short, the signal search algorithm of the mobile station may
take longer than the paging duration, and the call setup will fail.
H
DEFAULTS. Press this softkey to set all the parameters to their preset
conditions. Typically, the default values are based on the TDMA IS-136
specifications.
Summary of Contents for CMD 80
