Tektronix CMD 80, User Manual

Page: 215 / 672

Analog: Configuration
3–148
CMD 80 Digital Radiocommunication Tester User Manual
Press the NORMAL softkey to set the parameters for measuring the audio
frequency response of the mobile receiver in the normal mode (see Fig-
ure 3–117).
Figure 3–117: Analog module test rx qual configuration — audio freq response
(normal mode)
The following menu items are unique to this menu:
H
Supervisory audio tone color code (SCC) field. This field displays the
selected SCC and its associated frequency, which is inherited from the
MAIN ANALOG MODULE TEST CONFIG menu. See Figure 3–71 on
page 3–101.
H
Supervisory audio tone peak deviation. The supervisory audio tone
deviation is the amount of deviation that the base station uses to transmit
the SAT to the mobile station. Press the SAT PEAK DEVIATION
softkey to set the amount of deviation used.
NOTE
. If you selected NAMPS or NTACS as the standard, the DSAT PEAK
DEVIATION softkey and associated DSCC field replace the SAT PEAK
DEVIATION softkey and the SCC field.