Tektronix CMD 80, User Manual, Page: 348 / 672

Appendix A: Specifications
A–12
CMD 80 Digital Radiocommunication Tester User Manual
Table A–12 lists the Certifications and compliances for the CMD 80 Digital
Radiocommunication Tester.
Table A–12: Certifications and compliances
EC Declaration of
Conformity – EMC Meets intent of Directive 89/336/EEC for Electromagnetic
Compatibility. Compliance was demonstrated to the following
specifications as listed in the Official Journal of the European
Communities:
EN 50081-1 Emissions:
EN 55022 Class B Radiated and Conducted
Emissions
EN 60555-2 AC Power Line Harmonic Emissions
EN 50082-1 Immunity:
IEC 801-2 Electrostatic Discharge Immunity
IEC 801-3 RF Electromagnetic Field Immunity
IEC 801-4 Electrical Fast Transient/Burst Immunity
EC Declaration of
Conformity – Low
Voltage Compliance was demonstrated to the following specification as listed
in the Official Journal of the European Communities:
Low Voltage Directive 73/23/EEC
EN 61010-1:1993 Safety requirements for electrical
equipment for measurement, control,
and laboratory use
Installation Category
Descriptions Terminals on this product may have different installation category
designations. The installation categories are:
CAT III Distribution-level mains (usually permanently connected).
Equipment at this level is typically in a fixed industrial
location
CAT II Local-level mains (wall sockets). Equipment at this level
includes appliances, portable tools, and similar products.
Equipment is usually cord-connected
CAT I Secondary (signal level) or battery operated circuits of
electronic equipment