Tektronix CMD 80, User Manual, Page: 35 / 672

Getting Started
1–6
CMD 80 Digital Radiocommunication Tester User Manual
Figure 1–3: CDMA manual test — MS unregistered menu (initialization state)
NOTE
. During initialization, the “Waiting for...” text block blinks on and off
until the registration is complete (approximately 10 to 40 seconds).
When initialization is complete, the tester displays a CDMA MS REGISTERED
menu similar to Figure 1–4. If the mobile station does not connect, go to the BS
SIGNAL CNFG menu via the CONFIG MENU softkey in the home menu and
verify that the base station parameters are correctly configured.
Figure 1–4: CDMA manual test — MS registered menu (idle/access state)
6. Using the mobile station keypad, enter any telephone number (the number is
not important and can be up to 32 digits) and initiate the call.