Tektronix CMD 80, User Manual

Page: 186 / 672

Analog: Configuration
CMD 80 Digital Radiocommunication Tester User Manual
3–119
The following text discusses each of the ANALOG MANUAL TEST CON-
FIGURATION menu selections.
GO TO RSLT LIMITS. Press this softkey to display the result limits menu. This
menu will be slightly different depending on what system you are testing.
AMPS, JTACS, TACS, and ETACS systems will display the menu shown in
Figure 3–91, while NAMPS and NTACS systems will display the menu shown
in Figure 3–92.
Figure 3–91: Analog result limits menu for AMPS, JTACS, TACS, and ETACS
systems.
H
Press the CARR FREQ ERROR RANGE softkey to set the error range for
the carrier.
H
Press the TOTAL PEAK DEV MAXIMUM softkey to set the maximum
level for peak deviation. Total peak deviation must not exceed the level set
here.
H
Press the SAT FREQ ERROR RANGE softkey to set the error range for the
Supervisory Audit Tone frequency.
H
Press the SAT PK DEV ERROR RANGE softkey to set the error range for
the Supervisory Audit Tone peak deviation.
H
Press the ST FREQ ERROR RANGE softkey to set the error range for the
Signaling Tone frequency.
H
Press the ST PK DEV ERROR RANGE softkey to set the error range for the
Signaling Tone peak deviation.