CDMA: Module Test
3–42
CMD 80 Digital Radiocommunication Tester User Manual
Module Test
The MODULE TEST softkey (from the home menu) selects the module test
measurements for the system selected with the SYSTEM softkey. This section
discusses the tests available when you have selected CDMA as the system.
The module test feature supports testing the components of a mobile station
before it is capable of completing a call. The module test feature provides
CDMA signals and measures the output power and waveform quality; the tester
can perform these tests without the mobile station having call-processing
capability installed.
Press the MODULE TEST softkey to display the CDMA MODULE TEST
menu.
Figure 3–26: CDMA module test menu
The tester ignores the information content of the reverse link while in the
Module Test mode. The tester forward link can contain a pilot, sync, paging,
forward traffic, and five OCNS channels; you can individually set or disable the
relative power of these signals. The Module Test mode also supports the optional
AWGN signal injection.
In the Module Test mode, you can set the baseline output power using the
NOMINAL BS OUTPUT POWER softkey. The ACTUAL BS TOTAL POWER
display indicates the same value set by the NOMINAL BS OUTPUT POWER
when all of the CDMA channels are enabled.
If a CDMA channel is disabled, the ACTUAL BS TOTAL POWER display is
reduced by the amount contributed by the CDMA channel. The individual
CDMA and AWGN channel levels remain constant when other channels are
enabled or disabled.
Summary of Contents for CMD 80
