Tecno-gaz ORION TECH, Operation And Maintenance Manual

Page: 55 / 156

Operation and
maintenance manual
MU_029_EN 07/11/18
EN
Rev.0 Page 17 of 35
Failure to comply with the above instructions could cause:
-
detaching of paint with possible accidental dropping of such paint into
the patient area;
-
early ageing of the plastic parts with consequent weakening and the
possibility of breakages;
-
tarnishing of the protection screens and glass.
6.2 Cleaning the Product
Frequency We recommend you to clean the Product every day.
-
Do not use sharp, pointed or abrasive objects, to avoid the risk of
damaging surfaces.
-
Do not pour liquids directly on the Product.
-
Clean the Product with a damp, but not wet, cloth.
-
Clean with suitable detergents with low alkaline content and
chlorine free. Do not use abrasive products, petrol, paint thinners,
alkaline detergents, acids, containing alcohol or aldehydes;
-
Dose the detergents strictly according to the percentage indications
shown on the manufacturer’s technical sheet, being careful that no
liquids penetrate into the joints of the various Product parts, with
special care give to the reflector and supporting structure.
6.3 Product disinfecting
Frequency We recommend you to disinfect the Product every time before use.
Disinfectants can contain substances that are harmful for the health; use
disinfectants indicated by the national commission for hygiene and
disinfection, according to the hygienic standards adopted by the
Responsible Organization.
-
Do not use sharp, pointed or abrasive objects, to avoid the risk of
damaging surfaces.
Possibility of damaging Product
Possibility of damaging Product