Tecno-gaz ORION TECH, Operation And Maintenance Manual

Page: 46 / 156

Operation and
maintenance manual
MU_029_EN 07/11/18
EN
Rev.0 Page 8 of 35
3.2 Graphic symbols used in this Operation and
Maintenance Manual
The following safety measures must be put in place during Product
installation, use and servicing.
To emphasize their importance, a number of safety precautions are
repeated throughout the manual.
Follow the safety precautions before using or repairing the Product.
Carefully abiding by the safety precautions improves the ability to use
the Product safely and correctly and helps prevent incorrect
maintenance which could be hazardous and cause damage. The safety
measures are approximate and not exhaustive; the Operator, the
Responsible Organization and the Technical Service Personnel must
develop their capacities to upgrade and integrate them.
General warning signal
General mandatory code of conduct signal
General prohibition signal
3.3 Graphic symbols used on the Product
Below are the symbols to be found on the Product:
CE marking indicating the Product conforms to directive 93/42/EEC and
subsequent amendments and supplements
Date of manufacture (month and year)
Manufacturer’s address
Fuses used in the device
Comply with the instructions for use
Model
Serial number