Technogym EXCITE Run 500, Service Maintenance Manual

Page: 139 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 7.31
7.19. TREAD BELT MOTOR DISASSEMBLY
Figure7.19-1
Carry out the procedure described in
paragraph: 7.12. “Motor guard disassembly”,
just to remove the upper guard.
1.
Release belt tension disconnecting the spring
of the tension mechanism.
Figure7.19-2
2. Disconnect the tread belt motor connector,
highlighted in the figure, from the low kit
driver.
Figure7.19-3
3. Back off the 4 screws
(a)
which are fixing
the tread belt motor at the machine frame,
using a 17mm socket wrench.
4.
Remove the tread belt motor
(b)
.
Continued on following page
→