Technogym EXCITE Run 500, Service Maintenance Manual

Page: 190 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 9.36
To return to the upper menu level press
CLEAR
for a few seconds.
MENU –A–
Par. Address Description Value Par. Address Description Value
PID mode (700/900) 1 A-59 1218 PID min neg err 50
A-0 1200
PID mode (500) 0 A-100 1219 Set Linear speed 0
A-1 1201 PID ref sel 5 A-101 1220 Set Acc Dec 100
A-2 1202 PID fbk sel 4 A-102 1221 Set Incline ref 0
A-3 1203 PID digital ref 0 A-105 1222 Def Linear speed 8
A-4 1204 PID activat mode 0 A-106 1223 Def Acc Dec 100
A-5 1205 PID-Encoder sync 1 A-107 1224 Def Incline ref 0
A-6 1206 PID err sign rev 0 A-110 1225 Pulley Ratio 200
A-7 1207 PID Integ init en 0 A-111 1226 Roller Diameter 91
A-8 1208 PID update time 0 DCMot EncTimeout 250
A-50 1209 PID Prop gain 1 7
A-115 1227
DCMot EncTimeout 15
A-51 1210 PID Int tconst 1 150 A-116 1228 Fan command dly 3
A-52 1211 PID Deriv gain 1 0 50
A-53 1212 PID Prop gain 2 0
A-117 1229 ACMot EncToller
0(OFF)
A-54 1213 PID Int tconst 2 9999 A-118 1230 Check RunnerBand 10
A-55 1214 PID Deriv gain 2 0 A-119 1231 Check RunnerSpd 50
A-56 1215 PID high limit 80 A-120 1232 Curr clamp thr 200
A-57 1216 PID low limit -80 A-121 1233 Check RunnerDly 60
A-58 1217 PID max pos err 50
MENU –C–
Par. Address Description Value Par. Address Description Value
C-0 800 Save parameters 0 C-41 805 Save pars to key 0
C-1 801 Recall param 0 C-100 806 Measure stator R 0
C-2 802 Load default 0 C-200 807 Reset AC Flag 0
C-20 803 Alarm clear 0 C-201 808 Reset DC Flag 0
C-40 804 Recall key prog 0