Technogym EXCITE Run 500, Service Maintenance Manual

Page: 160 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 9.6
9.1.13. M
ODIFIABLE TARGET HEART RATE
It is possible to enable or disable modification of the target heart rate during a constant heart rate
exercise. To change the selection, when the LED matrix shows the current value:
HR: xxx
Press the
+/- GOAL
number keys to select the desired option out of those listed in the table below:
HR
MODIFIABLE < default>
NOT MODIFIABLE
Press
ENTER
to confirm the selection, use the
+
or
–
speed keys to move to the next or preceding
parameter.
9.1.14. E
NABLE CUSTOM MESSAGES
It is possible to configure whether a custom message is displayed when the machine is in the
standby state. To change the selection, when the LED matrix shows the current setting:
CUSTOM MESS. : xxx
Press the
+/- GOAL
number keys to select the desired option out of those listed in the table below:
CUSTOM MESS.
YES <default>
NO
Press
ENTER
to confirm the selection, use the
+
or
–
speed keys to move to the next or preceding
parameter.
9.1.15. E
NABLE UP
/
DOWN MOTOR
This parameter enables or disables use of the machine incline. To change the selection, when the
LED matrix shows the current setting:
UP-DOWN: xxx
Press the
+/- GOAL
keys to select the desired option out of those listed in the table below:
U
P
-D
OWN
ENABLED <default>
DISABLED
Press
ENTER
to confirm the selection, use the
+
or
–
speed keys to move to the next or previous
parameter.