Technogym EXCITE Run 500, Service Maintenance Manual

Page: 178 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 9.24
9.4. SERVICE MENU CONFIGURATION LED MODEL
The configuration procedure is invoked when the machine is in standby mode, using a different
procedure for the 500 and 700 models.
•
Accessing configuration of 500 models
Simultaneously press the
ENTER
,
↑
,
CLEAR
keys. The following prompt appears on the display:
ENTER PASSWORD:
To access the procedure, type in the password
2501
which protects against unauthorized access and
press “Enter” to confirm. To enter the password, increase or decrease the displayed value using the
↑
and
↓
keys, or use the
+/- GOAL
keys to scroll through and modify the individual digits.
At this point there are two options available:
↑
= Tech Config
↓
= Troubleshooting
Press numeric key
↑
to access the menu for configuring technical parameters; the machine display
will begin showing the current configuration, structured as in the diagram below:
•
Accessing configuration of 700 and 900 models
Simultaneously press the keys
369
for 700 LED models, whereas on 700 Wellness TV models the
keys
0369
must be pressed one after the other. The following prompt appears on the display:
ENTER PASSWORD:
To access the procedure, type in the password
2501
which protects against unauthorized access and
press the “Enter” key to confirm. At this point there are two options available:
1 = Tech Config
2 = Troubleshooting
Press numeric key
1
to access the menu for configuring technical parameters; the machine display
will begin showing the current configuration, structured as in the diagram below: