Technogym EXCITE Run 500, Service Maintenance Manual

Page: 67 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 6.3
Here below have been detailed all the parameters of the menu.
6.1.1. I2C D
EVICE
T
EST
The I2C Device test checks the communication following the 32K and 256K memories. The test
can have two outcomes:
•
“Test Successful”:
Signifies that data packets were successfully transmitted and received
toward the display board.
•
“EEPROM Error”
: Signifies that the display board has communication problems with the memories.
6.1.2. CS
AFE
COM T
EST
The test checks the communication on CSafe ports. The test can have two outcomes:
•
“Test Successful”:
This means that the test was completed successfully, i.e. that serial
communications on the selected port are correct.
•
“Error COM1”:
This means that the outcome of the test was negative.
The “CSafe COM test” done on a machine which CSafe port is not plugged with the
monitor plug described at paragraph 4.4. “Monitor plug for CSafe port”.
6.1.3. L
OW
K
IT
COM T
EST
The test checks the communication with the Low kit. The test can have two outcomes:
•
“Test Successful”:
This means that the test was completed successfully, i.e. that serial
communications on the selected port are correct.
•
“Error COM2”:
This means that the outcome of the test was negative.