Technogym EXCITE Run 500, Service Maintenance Manual

Page: 114 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 7.6
Figure7.2-11
2. Back off the 9 screws
(a)
that fix the display
plate on the casing, with a small Phillips
screwdriver.
Figure7.2-12
3. To remove the LCD, back off the screws
(b)
with a small Phillips screwdriver, on both
sides.
Figure7.2-13
4. The Touch Screen is placed into the display
cover, as shown in the figure to side.
WARNING: The incorrect positioning
of the Touch Screen in its housing, could
cause its breakage during the tightening
of the screws. Be careful to place and to
check the correct position of the T.S., as
shown in the figure.
To reassemble the LCD Touch Screen, carry out
the above steps in reverse order.
Carry out the Tuoch Screen calibration
after the display reassembly, as
descrided in the paragraph: 9.9. “Touch
screen calibration”.