Technogym EXCITE Run 500, Service Maintenance Manual

Page: 70 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 6.6
6.2. TROUBLESHOOTING MENU FOR 700-900 LED MODELS
This section can be used to test the operation of certain machine components (AC/DC Motors, LED
display, keyboard, serial ports, Low Kit). It is invoked, when the machine is in standby mode,
simultaneously press the keys
369
for 700 LED models, whereas on 700 Wellness TV models the
keys
0369
must be pressed one after the other. The following prompt appears on the display:
ENTER PASSWORD:
To access the procedure, type in the password
2501
which protects against unauthorized access and
press the “Enter” key to confirm. At this point there are two options available:
1 = Tech Config
2 = Troubleshooting
Press numeric key
2
to access the menu for configuring technical parameters; the machine display
will begin showing the current configuration, structured as in the diagram below:
TROUBLESHOOTING
MANUAL TEST
MAN.INVERTER
TEST
MAN.UPDOWN
TEST
MAN.KEYBOARD
TEST
I2C Devices Test
AUTOMATIC TEST
UpDown Test
Inverter Test
LED Test
SERIAL PORTS
TEST
CSafe COM Test
TGS COM Test
Low Kit COM Test
To scroll through the list of available functions, press the
+
or – effort level keys to display the next
or the preceding item; confirm the choice by pressing
ENTER
. To cancel the operation, press the
CLEAR
key for a few seconds.