Technogym EXCITE Run 500, Service Maintenance Manual

Page: 69 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 6.5
The test can have two outcomes:
•
“DC Error (Up/Down), press Enter to continue”:
The message indicates that the values do
not correspond. The specific message (Up or Down) indicates whether the error occurred during
the upward (Up) or downward (Down) movement of the test.
•
“Test Successful, press Enter to continue”:
This message indicates that the test was
completed without errors.
6.1.8. M
AN
. I
NVERTER
T
EST
The manual inverter test displays the values output by the inverter drive during movements of the
tread belt motor. The values displayed are:
•
Tread belt motor drive frequency (x100);
•
Current (x10);
•
Voltage.
During the test it is possible to change the speed using the + and – speed keys, to see the change in
the values of frequency, current and voltage.
6.1.9. M
AN
. U
P
D
OWN
T
EST
The manual UpDown test displays the values output by the elevation motor drive during machine
incline movements. The values displayed are:
•
Machine incline position;
•
Number of pulses generated by the elevation motor encoder;
•
State of limit switch: if it is pressed, “MIN” is shown, nothing in the other condition.
During the test it is possible to vary the incline using the
↑
and
↓
elevation keys, to check that the
values vary accordingly.