Teac DS Series, Instruction Manual, Page: 92 / 104

Page 84
Transfer
[Transfer] is used for listing the recorded files and transferring the recorded file to the PC.
Click the data file to be transferred.
Double click the line of the selected file to display its thumbnail data. You can specify the part of
the transferring data from the data file.
About Transferring Data
Make sure to set the network drive setting prior to the operation.
Secure an enough capacity at the network drive to enable to transfer a target data.
A subfolder named by the data and time (YYMMDDhhmmss) of the data transfer start is
automatically created, the transferred data are saved into this subfolder.
Data transfer is possible for the external sampling data except for data extracting.
Data Extracting at Event Mark
The thumbnail displays an approximately location of an event mark due to compressed display
process. Therefore there is a discrepancy between the scan position of the displayed mark line
and the actual MARK value on the header file. When extracting to transfer data by using the
thumbnail menu, take a consideration this issue to set the affordable start and end positions.