Teac DS Series, Instruction Manual, Page: 84 / 104

Page 76
12.2 <SET NETWORK> Menu
You can decide the network parameter entries entered at the <CHANGE PARAM> menu.
The entries decided by execution of this menu will be effective.
Turn off and on the DS system to reflect the changes.
1.
Display the <NETWORK> menu.
2.
Move the cursor to [SET NETWORK] by using the up key.
3.
Press the ENTER key to decide the network parameters entered at the <CHANGE PARAM>
menu. The following is displayed.
4.
Press the ENTER key to return to the <NETWORK> menu.
Caution After Changing Network Parameters
Make sure to reboot the system after changing the network parameters.
The reboot process enables to the changed parameters and the displays related to the network
address.
When using the DHCP function, make sure to connect the LAN cable to the DHCP server in the
network before truing on the power.