Teac DS Series, Instruction Manual, Page: 59 / 104

DS Series Instruction Manual 2006.12
Page 51
①
②
8.
The system displays the following message and starts the unmounting process to exchange
the hard disk drive.
9.
The system displays the following and releases the lock of the internal hard disk drive when
the unmouting process (approximately 50 seconds) is completed.
10.
Withdraw the internal hard disk tray of the front panel. The system displays the following.
11.
Loosen two fixed screws for the drive unit. Remove the hard disk drive by slightly lifting
up after pulling the tray to the forward direction.
CAUTION
When Removing Hard Disk Drive
Be carefully when removing the hard disk drive. Its chassis may be very hot.