Teac DS Series, Instruction Manual, Page: 3 / 104

Page i
Index
IMPORTANT SAFETY INSTRUCTIONS Page iii
1. INTRODUCTION Page 1
1.1 Overview Page 1
1.2 Notes Before Using Page 1
1.3 Keys and Controls Page 2
1.4 Pin Assignment of Input/Output Connector Page 4
2. MANUAL INFORMATION Page 5
3. TURN ON AND TURN OFF SYSTEM Page 7
3.1 Cautions on Power Supply Page 7
3.2 Turn On System Page 8
3.3 Calibration at Power On State Page 9
3.4 Turn Off System Page 10
4. MENU OPERATION Page 11
4.1 Main Menu Page 11
4.2 How to Move Among Menus Page 12
4.3 Functions on Each Menu Page 12
5. PANEL LOCK Page 13
6. RECORD CONDITION SETTINGS Page 15
6.1 <INPUT AMP> Menu Page 16
6.1.1 Input Range Setting Page 16
6.1.2 Auto Range Page 17
6.1.3 Input Mode Setting Page 19
6.1.4 Zero Shift Page 20
6.1.5 Manual Calibration Page 21
6.2 Sampling Frequency Setting Page 23
6.3 Number of Recording Channels’ Setting Page 25
6.4 Recording Target Device Setting Page 26
6.5 Record Mode Setting Page 28
6.6 Trigger Mode Setting Page 29
6.7 System Settings Page 33
6.7.1 Voice Memo Channel Setting Page 33
6.7.2 Output from Speaker Page 35
6.7.3 Recording IRIG-B Time Code Page 36
7. RECORDING OPERATIONS Page 37
7.1 Check Recording File Name and Record Mode Page 37
7.2 Start and Stop Recording Page 38
7.3 LED Display While Recording Page 40
7.4 Monitor Output While Recording Page 40
7.5 Format Page 41
7.6 Delete Last Recorded Data File Page 43
7.7 About Data File Page 45
7.7 Recording Synchronization Page 48
7.9 Exchange Internal Hard Disk Drive Page 50