Teac DS Series, Instruction Manual, Page: 75 / 104

DS Series Instruction Manual 2006.12
Page 67
10.4 Output Range Setting
You can set the output range of each channel.
1.
Confirm that the system is in ready state (<READY> display).
(If the system is not in ready state, press the STOP key a few times depending on the hierarchy
of the current menu to move to ready state.)
2.
Press the ENTER key to display the main menu <MENU>.
3.
Press the ENTER key to go to <PLAYBACK> by confirming that the cursor is in [PLAYBACK].
4.
Move the cursor to [RANGE] by pressing the down keys.
5.
Press the ENTER key to go to <PLAY RANGE>.
6.
Move the cursor to the channel to set its input range by pressing the up and down keys. You
can set all effective channels with the same output range at [ALL].
Press the left and right keys to select the desired output range.
7.
After setting the output ranges of all channels, press the ENTER key to decide the selections.
The <PLAYBACK> menu is displayed.
If you do not want to decide the selection, press the STOP key. The selection is not effective.
Then return to the <PLAYBACK> menu.