Teac DS Series, Instruction Manual, Page: 19 / 104

DS Series Instruction Manual 2006.12
Page 11
4. MENU OPERATION
You can use menu displayed by LCD on the front panel to control the DS unit with key operations.
Use the cursor to select the menu item displayed by pressing the up and down keys.
4.1 Main Menu
Display the main menu.
1.
Confirm that the system is in ready state (<READY> display).
< - - ch > part is flashing.
2.
Press the ENTER key.
3.
The main menu <MENU> is displayed.
At the recording unit;
At the recording and playback unit;
4.
Use the up and down key to move the cursor ( ).
The position at which the cursor is located is an effective selection.
Select the item, then press the ENTER key to move to the lower hierarchic menu.
Each time the down key is pressed, the cursor moves as follows.
[PLAYBACK] [RECORD] [SYSTEM] [PARAMETER] [MISC] [NETWORK]
⇒ ⇒ ⇒ ⇒ ⇒
5.
Move the cursor to [<<TOP], then press the ENTER key to return to ready state.
It shows the current selection [SYSTEM] is
located at 4
th
out of total 8 items.
Move the cursor by using the up and
down keys.
Cursor
Show the current selection.