SYSMEX XE-5000, Instruction Manual, Page: 77 / 262

CHAPTER 6 Operation
Sysmex XE-5000 Instructions for Use 6-23
R
e
vi
se
d A
p
ri
l 20
07
8. When all of the racks have moved to the left rack pool of
the sampler, the READY LED turns on.
STAT analysis in sampler mode
1. Press the SAMPLER key to interrupt the sampler
analysis. “STAT” appears at the upper left of the LCD
screen. When the sampler analysis is interrupted and the
message “STAT READY” appears at the upper left of the
LCD screen, manual/capillary analysis can be performed.
2. Press the MANUAL key and input the sample ID number
for the STAT analysis. Or, read the barcode using a
handheld barcode scanner (option).
3. Analyze a sample in the same procedure as with ordinary
analysis.
4. After the STAT analysis is completed, the message “STAT
READY” will appear at the upper left of the LCD screen
again; press the SAMPLER key. The message
“SAMPLER MODE” will appear on the LCD screen, and
sampler analysis will resume.
Information
• When the manual closed mode is selected, it is
impossible to perform sampler analysis. To carry out
the sampler analysis, select the manual mode.
• After sample No. or rack No. is input, move the
cursor to the tube position. Otherwise, it is
impossible to start the sampler analysis. Once the
cursor is moved, the sampler analysis can be started
even when the cursor is not at the tube position.
• HPC analysis and body fluid analysis are not
possible in sampler mode.
Note:
When the SAMPLER key is pressed during sampler
analysis, the sampler stops and STAT analysis
(manual or capillary analysis) can be performed.