SYSMEX XE-5000, Instruction Manual, Page: 106 / 262

CHAPTER 7 Quality control
7-10 Sysmex XE-5000 Instructions for Use
R
e
vi
se
d A
p
ri
l 20
07
Output to printers or host computer
The selected range on the Control, Other1/Other2 and
X-barM charts can be output.
Graph print output
1. Use the range selection function to specify the range to
print from the QC chart.
2. When “Report (GP) (R)” is selected from the “Output
(P)” menu, the selected area of chart is printed as a
graph. (If no range is specified, the plot at the current
cursor position is printed).
Ledger print output
1. Use the range selection function to specify the control
data to print from the QC chart.
2. When “Ledger (LP) (L)” is selected from the “Output
(P)” menu, the selected area of the control data is printed
as a ledger format. (If no range is specified, the control
data at the current cursor position is printed).
HC (Output to Host Computer)
1. Use the range selection function to specify the control
data from the QC chart to output to the host computer.
2. When “Host Computer HC(H)” is selected from the
“Output (P)” menu, the selected area of the control data
is output to the host computer. (If no range is specified,
the control data at the current cursor position is output to
the host computer).
Save
Save the lot information and QC data.
1. To save the QC-files on a removable media, place a
memory stick in the USB slot and select a corresponding
drive (F: or higher).
2. Click the “Save” button.
The Save dialog box will be displayed.