SVP HDT-02 User Manual Download

Page: 48 / 233

HDT-02_H.264

High Definition Digital Camera Transmitter

MANUAL V9.9

4.6

Menu Structure

The main menu is used to access the main parameters of the Transmitter

which are explained below.
The following menu screen can be accessed by pressing the Cross key from

the main screen.

Figure 4.14: Main Menu

•

Encoder

–

All the parameters related to the video, Audio and data

inputs are configured here. Besides, all video, Audio, multiplexing and
data encoding parameters are accessed here.

•

–

DVB-T2/T/S2/S transmission parameters are set in this section.

•

Unit

–

Parameters related to the Web Server and other internal options

of the Transmitter are configured here.

Summary of Contents for HDT-02










































































































































































































































Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands

SVP HDT-02, User Manual

Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands