SVP HDT-02, User Manual

Page: 88 / 233

HDT-02_H.264 High Definition Digital Camera Transmitter
MANUAL V9.9 88
Line nº Function
1
Frequency (editable parameter) :
Select the frequency at which the signal is going to be transmitted.
To establish the frequency value, first press the OK button and then,
with the Up, Down arrow buttons select the desired value. To save
the introduced value, press the OK button.
2
Sort of output (eligible parameter) :
To select the sort of output, press Right and Left keys. Once the
option is selected, press the OK button to save it.
The possibilities are:
• Low Carrier (the output signal is a continuous wave and the
output power is adjusted to 10 dB less than that configured in
the power field).
• Carrier (The RF output is carrier only (CW) without
modulation. To specify the output power, select it in the power
option).
• Modulator (The RF output carrier with modulation. To specify
the output power, select it in the field below).
3
Power (editable parameter) :
In this field, the value of the output power can be selected. The
possible output power range is from -5 to 20 dBm.
The available options are:
• L-BAND (The output power of the HDT-02 in dBm).
• HPA (The output power of the amplifier in dBW).
• EIRP (HPA + Antenna Gain) (dBW).
4
Modulation (eligible parameter) :
Here the constellation of the modulation can be chosen. Use Right
and Left buttons to select the desired constellation.
The available options are:
• QPSK
• 8PSK
• 16APSK
• 32APSK