SVP HDT-02 User Manual Download

Page: 124 / 233

HDT-02_H.264

High Definition Digital Camera Transmitter

MANUAL V9.9

124

6.2.1.1

Video

•

Input (eligible parameter):

Select the type of the video input. The video input options available are

SDI, HDMI1, HDMI2, CVBS, ASI and Generator.

•

Format (reading parameter):

Here the format of the video input signal is displayed. If there is no
video input

then the message ‘not detected’ is displayed.

•

Bitrate (reading parameter):

In  this  field  the  user  can  see  the  bitrate  in  Mbps  assigned  by  the
encoder to the video input signal.
However, if the introduced signal is ASI, this field indicates the input
bitrate of this ASI signal.

•

Delay (eligible parameter):

In this field, the delay of the coding process is configured. The available

options are Standard Delay, Super Low Delay or Ultra Low Delay.

•

Profile (eligible parameter):

In this field, the codification profile can be configured. The available

options are 4:2:0 and 4:2:2.

Summary of Contents for HDT-02










































































































































































































































Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands

SVP HDT-02, User Manual

Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands