SVP HDT-02 User Manual Download

Page: 114 / 233

HDT-02_H.264

High Definition Digital Camera Transmitter

MANUAL V9.9

114

In the USB device, the only file that can be allocated inside it is

the firmware file of the device to be updated.

With the equipment powered off (

with no power supply

), insert the

USB device in the USB connector, placed in the rear panel.

Before introducing the USB device, remove the power supply of

the equipment.

Now, switch on the device.

Go to Unit menu. From the main screen, press cross button to access

the menu. There, with the Up, Down buttons, select the Unit option.

10.

Select Firmware by pressing the OK button.

11.

Select Update Firmware with the OK button.

Don’t power off the device during the updating process.

Summary of Contents for HDT-02










































































































































































































































Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands

SVP HDT-02, User Manual

Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands