SVP HDT-02, User Manual

Page: 93 / 233

HDT-02_H.264 High Definition Digital Camera Transmitter
MANUAL V9.9 93
Line nº Function
1
Frequency (editable parameter) :
Select the frequency at which the signal is going to be
transmitted. To establish the frequency value, first press the
OK button and then, with the Up, Down arrow buttons select
the desired value. To save the introduced value, press the
OK button.
2
Sort of output (eligible parameter) :
To select the sort of output, press Right and Left keys. Once
the option is selected, press the OK button to save it.
The possibilities are:
• Low Carrier (the output signal is a continuous wave
and the output power is adjusted to 10 dB less than
that configured in the power field).
• Carrier (The RF output is carrier only (CW) without
modulation. To specify the output power, select it in
the power option).
• Modulator (The RF output carrier with modulation. To
specify the output power, select it in the field below).
3
Power (editable parameter) :
In this field, the value of the output power can be selected.
The possible output power range is from -55 to 5 dBm.
The available options are:
• L-BAND (The output power of the HDT-02 in dBm).
• HPA (The output power of the amplifier in dBW).
• EIRP (HPA + Antenna Gain) (dBW).
4
FEC (eligible parameter) :
Here the value of the Forward Error Correction can be
chosen. Use Right and Left buttons to select the desired
value.
The available options are:
• 1/2
• 2/3
• 3/4
• 5/6
• 7/8
5
SR (editable parameter) :
In this field, the value of the symbol rate can be introduced.
BW (reading parameter) :
In this field, the value of the bandwidth of the transmitted
signal is displayed.