SVP HDT-02, User Manual

Page: 28 / 233

HDT-02_H.264 High Definition Digital Camera Transmitter
MANUAL V9.9 28
• Video Input selection
Possibilities: CVBS, HDMI, SDI, DVB-ASI Transport Stream or
Generator.
Behaviour of the corresponding character: If the character is static then
it means presence of that signal. If the character blinks, then it means
absence of that signal.
• Audios status indication: If Audio 1 or 2 is not darkened then it is
enabled. On the other hand, if Audio 1 or 2 is darkened then it is
disabled.
• Data status indication: If this field is not darkened then it means that
data is enabled. On the other hand, if this value is darkened it means
that data is disabled. However, when this field is static, its meaning is
presence of the data whereas if this field is blinking, it means absence
of the data.
• KLV Metadata status indication: If this field is not darkened then it
means that KLV metadata is enabled. On the other hand, if this value is
darkened it means that data is disabled. Moreover, when this field is
static, its meaning is presence of the data whereas if this field is blinking,
it means absence of the data.
• Input video signal format.
• Encoder Video Profile (4.2.0 or 4.2.2).
• Latency (Standard Delay, Low Delay or Super Low Delay)
▪
Standard Delay (Lipsync < 10 ms)
▪
Super Low Delay (Lipsync < 10 ms)
→
2 frame
▪
Ultra Low Delay (Lipsync = 40ms)
→
1 frame
Next, the linkages between the input and the character displayed on the
principal screen is shown:
Video
CVBS C
HDMI H
SDI S
ASI A
Test-Pattern G
Audio
Embedded E
AES/EBU U
Analogue A
Test-Tone G