SVP HDT-02 User Manual Download

Page: 216 / 233

HDT-02_H.264

High Definition Digital Camera Transmitter

MANUAL V9.9

216

E.2

DVB-T2

DVB-

T2 is the world’s most advanced digital terrestrial

television (DTT) system, offering more robustness, flexibility

and at least 50% more efficiency than any other DTT system. It supports SD,
HD, UHD, mobile TV, or any combination thereof.

E.2.1

How Does It Work

Like its predecessor, DVB-T2 uses OFDM (orthogonal frequency division

multiplex) modulation with a large number of subcarriers delivering a robust
signal, and offers a range of different modes, making it a very flexible

standard. DVB-T2 uses the same error correction coding as used in DVB-S2

and DVB-C2: LDPC (Low Density Parity Check) coding combined with BCH
(Bose-Chaudhuri-Hocquengham) coding, offering a very robust signal. The

number of carriers, guard interval sizes and pilot signals can be adjusted, so
that the overheads can be optimised for any target transmission channel.

E.2.2

DVB-T2 New Features

The DVB-T2 standard has several improvements in comparison with the DVB-

T standard.

FEC coding

In the error correction stage, the DVB-T2 standard implements a combination
of LDPC codes with BCH codes. LDPC codes allow a close performance to

Shannon limit and the BCH codes are used to eliminate the floor error of the

LDPC codes.

Figure E.1: LDPC and BCH codes

Constellation Rotation

This new feature consists of a rotation of some degrees of the constellation.

With this rotation, dependence between the I and Q components of the signal

is achieved. This means that with only one component (the I or the Q) it is
possible to know exactly the symbol to which it belongs.

Summary of Contents for HDT-02










































































































































































































































Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands

SVP HDT-02, User Manual

Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands