SVP HDT-02 User Manual Download

Page: 77 / 233

HDT-02_H.264

High Definition Digital Camera Transmitter

MANUAL V9.9

4.6.1.18

Scrambler

In this section the signal can be encrypted with different encryption methods.

Figure 4.37: Scrambler menu

Line nº

Function

Mode

(eligible parameter)

To choose the desired encryption, press the Right, Left keys.

The available options are:

•

None

•

BISS-1

•

BISS-E

•

AES-128 (Optional)

•

AES-256 (Optional)

Table 4.22: Scrambler menu options

To introduce the key of the encryption, follow these steps:

Choose the correct encryption.

Press the OK button to introduce the key.

With Left and Right buttons select one field and with UP, Down

buttons choose one value from 0 to 9 or A to F.

Press the OK button to set the key.

Summary of Contents for HDT-02










































































































































































































































Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands

SVP HDT-02, User Manual

Search results

Summary of Contents for HDT-02

Reviews:

Related manuals for HDT-02

Brands by name

Popular brands